Misc Telemetry Tool for PC2 13.4

[Iko Rein]

Hello,

V13 with F1 23 support is out. You can get the new version from
https://www.racedepartment.com/downloads/telemetry-tool-for-f1-23-and-many-other-games.61580/

Enjoy, and get faster.

 

[Iko Rein]

Hello,

V13.1 with is out. You can get the new version from
https://www.racedepartment.com/downloads/telemetry-tool-for-f1-23-and-many-other-games.61580/

There is new PC2 relay, which fixes the odd bug, where the relay would not start. Also the new version contains many multi-car data fixes. So if you are on 13.0, it is advisable to update to 13.1.

Enjoy, and get faster.

 

[Iko Rein]

Hello,

V13.2 is out. You can get the new version from
https://www.racedepartment.com/downloads/telemetry-tool-for-f1-23-and-many-other-games.61580/

The new version contains many updates and fixes. So if you are on 13.0 or 13.1, it is advisable to update to 13.2.

Enjoy, and get faster.

 

[Iko Rein]

Iko Rein updated Telemetry Tool for PC2 with a new update entry:

Telemetry Tool for PC2

Version 13.3 is here.

Notable changes:

• ACC Nordschleife trackmap + related additions
• AMS2 new tracks/cars data
• Some PC2 related fixes
• http-server: Added new /JSON/sessiondata
• Histogram fixes/tweaks and added multidata histogram
• A lot of tweaks/fixes and optimizations

For list of the changes, check the ReadMe.txt.

Updating from older versions: Just unzip .zip on top of your old installation.

Clean/New install. Unzip the files to anywhere in your system...

Read the rest of this update entry...

 

[Iko Rein]

Iko Rein updated Telemetry Tool for PC2 with a new update entry:

Telemetry Tool for PC2

Small update 13.4 is here.

Main fix

• AMS2: Fixed issue, where in some cases the Tool would not start in AMS2 mode.

For list of the changes, check the ReadMe.txt.

If you don't play AMS2, you don't have to update.

Updating from older versions: Just unzip .zip on top of your old installation.

Clean/New install. Unzip the files to anywhere in your system (e.g. under 'Program Files\Telemetry Tool' or to somewhere else). On the first run the Tool will ask...

Read the rest of this update entry...

 

[CRMS]

Thanks Iko again.
I'm trying to map a controller button to change tab on PC F1 and Fanatec Formula wheel. The most convenient button is RT but that also is used to edit car garage settings using 7 and 8.
I wondered what button "Special" is?? Can that be mapped to a wheel button?

 

[Iko Rein]

Thanks Iko again.
I'm trying to map a controller button to change tab on PC F1 and Fanatec Formula wheel. The most convenient button is RT but that also is used to edit car garage settings using 7 and 8.
I wondered what button "Special" is?? Can that be mapped to a wheel button?

This is what I do with my SF1000 with F1 games. I have mapped the game's 'UDP Action 12' to the button I want to use for Tab Change. This 'UDP Action 12' is actually the 'BUTTON_31' in the Tools settings (being good at math, you will notice that the 'UDP Action 1' is actually 'BUTTON_20' in the Tool's settings). I use the numbers, as most wheels numerate the buttons and do not use PS or XBOX names for buttons.

So this is how you do it with F1 games: Select one button on your wheel, which you want to use as tab change button. Now go to the controller settings in F1 23 (works in earlier versions and works on F1 24 too) and find the "UDP Action XX", you want to map and map it to the 'tab change' button on your wheel. To verify you have mapped the right button, go to the 'Raw Data' and press the chosen 'tab change' button. On top of the 'Raw data' page you should see the buttons 'in tool assignment'. If it is correct, then go to Settings and select the correct action for tab-change.

For PC2 you can just press the buttons to find which you want to assign for tab change. In AMS2 in addition to that you can also assign the DPAD up/down/left/right for tab change. In ACC/AC/rF2/R3E the options are bit more limited.

Cheers.