Hi all, I thought I'd share this little DIY I did. I was tired of the velcro strip to secure the pedals to my Playseat Challenge, so I had a look in the hardware store if I could find something to attach to the M6 threads of the Logitech G25 pedals I (still) use. This is what I came up with:
I found this galvanized punched metal strip (17mm width, 5m spool). Unfortunately, it didn't align with all six bolt holes, so only the four locations indicated in red fit. Maybe someone more handy than me can drill additional holes into the metal strip. Still, it's very sturdy and for 7€ including 6x M6x2 screws I'm very happy. No movement at all when using the seat or when stored away. As you can see, I cut the foam so it doesn't touch the floor.
I found this galvanized punched metal strip (17mm width, 5m spool). Unfortunately, it didn't align with all six bolt holes, so only the four locations indicated in red fit. Maybe someone more handy than me can drill additional holes into the metal strip. Still, it's very sturdy and for 7€ including 6x M6x2 screws I'm very happy. No movement at all when using the seat or when stored away. As you can see, I cut the foam so it doesn't touch the floor.
Last edited:
![Luca [OT]](/data/avatars/s/3235/3235113.jpg?1697196734){kind=avatar}