Is there any way to change the traction level value when turned off?

[TheGod0806]

Is there any way to change the traction level value when turned off?

 

[TheGod0806]

Someone?

 

[jgf]

You can edit the grip of the tires.

 

[TheGod0806]

You can edit the grip of the tires.

Do you know where I could edit the tire grip, if it's TractionControlGrip, I tried changing it to try to compensate for the acceleration gain, but it didn't work.

 

[jgf]

In the tires .tbc file, edit the lines

DryLatLong=(1.335, 1.335) // Lateral/longitudinal coefficients in dry weather
WetLatLong=(1.290, 1.290) // Lateral/longitudinal coefficients in wet weather

Make small changes and test, higher numbers are more grip; there will be settings for front and rear tires, for each compound, so scroll through the entire file. And there are many tire files throughout the vehicles folder; some cars may have more than one, and several cars may share one.

In the .hdc file for each car are:

TractionControlGrip=(1.00, 0.20) // average driven wheel grip multiplied by 1st number, then added to 2nd
TractionControlLevel=(0.30, 0.90) // effect of grip on throttle for low TC and high TC
ABS4Wheel=1 // 0 = old-style single brake pulse, 1 = more effective 4-wheel ABS
ABSGrip=(1.00, 0.20) // grip multiplied by 1st number and added to 2nd
ABSLevel=(0.30, 0.90) // effect of grip on brakes for low ABS and high ABS

This may be more what you are looking for; I've not used driving assists so never tweaked these.