diy

  1. BloodySalmonMan

    Cosworth LMP3 style dash for Nextion 1.0

    LMP3 style dash for Nextion 3.5" display. The dash can be configured using SimHub. There are 3 screens: Idle, P1 and R1. Here are the available properties: Idle page Cosworth logo P1 page Water temp Oil temp Air temp RPM Gear Speed Average fuel usage Fuel usage of the last lap Fuel left...
  2. F

    DIY Wood Sim-Rig with all components and some guideline measurements

    I am into simracing for 1 and a half year now, which is rather short, but it feels like a hobby which I never found, but always needed. I started with a PS3 Controller, then went to the Steam Controller and afterwards I got my Logitech G29 at christmas last year, since then I've absolutely...
  3. IMrIMike

    Any 3DRap.it Experience?

    Looking to order one of their GT Rim Assembly Kits with the dual clutch. I have watched the review of Sim Racing Garage about the GT1 with the screen, now I'm not looking for something super sturdy as I´m only going to mount this to my Thrustmaster TX base but the review was looking promising...
  4. BloodySalmonMan

    2019 Alfa Romeo F1 Steering Wheel

    Hi guys. As some people requested, I decided to design 2019 Alffa Romeo F1 wheel. Here is the render of the wheel. In case you're interested, please contact me for further details. Price Complete wheel: €1040 Data for DIY: €35 (Will upload on Pinshape soon) website...
  5. BloodySalmonMan

    DIY AMG GT3 steering wheel

    Hey guys. I've designed and built AMG GT3 style wheel this time. The logo on the centre is Alfa Romeo but it was requested by the customer, and yeah, it worked pretty nicely I should say. So, as per usual, here are some pics of the wheel! If you're thinking about buying one, feel free to DM me...
  6. BloodySalmonMan

    DIY Cosworth steering wheel (LMP3/F4)

    Hi guys. I've been racing in VEC for SpeedyMite Racing this year and though it'd be good to have a replica wheel of the car I was racing in. So I gave it a try. The machine was Norma LMP3 and it uses Cosworth CFW277 steering wheel. I've designed it on CAD then laser cut Aluminium plates and 3D...
  7. Mr. Vermeer

    DIY Handbrake for under 25 bucks

    I made my own handbrake (prototype) for a fraction of the cost that retailers dare to ask. It's based on an aluminium hydraulic handbrake from China and uses a Hall-Sensor and a neodymium magnet to detect the motion of the handle. The Hall-Sensor is wired to a Pro Micro (Arduino) board which is...
  8. BloodySalmonMan

    Formula One style steering wheels

    Hi guys. I've been working on Formula One style steering wheel, ordered by my Spanish friend. Please have a look on the final product. Grips are Suede wrapped and it worked pretty nicely (at least a lot better than I expected). Some parts are 3D printed BUT they're all sanded and painted. I...
  9. BloodySalmonMan

    DIY Corvette C7.R GTE style steering wheel (Complete)

    Hi guys. After building Coswroth MK2 (LMP2) steering wheel, I received an order to make Corvette C7.R GTE style steering wheel. And I want to share my work before sending it all the way to Australia. As per usual, here are some pictures of the completed wheel rim. The rim consists of two main...
  10. BloodySalmonMan

    DIY LMP2 syle steering wheel build (complete)

    Hi all. I've been working on a DIY steering wheel project for some months and now it's done so want to share my work. The wheel I made is inspired by Cosworth CCW MK2 which is mainly used in many LMP2 cars. I reckon all of you want to see the final product so here it is!:) Cost report / Parts...
  11. T

    Can I use this slave cylinder for my handbrake?

    Hi! I'm building a DIY Hydraulic handbrake for my rig on the DSD's base (DerekSpeareDesigns). Do you think I can use this BMW cylinder as my slave cylinder...
  12. 12Gauge

    Advice from the experts/users: 80/20 Simg Rig design

    Hi guys, First post from a long time lurker here. I really enjoy simracing which really got a boost since I discovered Assetto Corsa four or five years ago. In a few weeks I will move to a new house in which I will have my own room/mancave which means that I have room for a dedicaded sim rig. I...
  13. F

    2 DOF Sim Racing Rig

    Hi all, I am new to the world of sim racing, but have been a fan of F1 for a while now. I've finally decided it's time to design/build a sim racing rig and I am looking for some clarification regarding rigs with 2 degrees of freedom. I have seen some setups with stationary screens and some...
  14. callumjtc

    DIY Hydraulic & Pneumatic Pedal Project

    This will be a build focused thread, a continuation from the success of my previous thread containing a survey (many thanks for the overwhelming number of helpful responses!) for an A level technology project. The survey guided me towards building these pedals for the project which will...
    • callumjtc
    • Thread
    • diy diy pedals hardware hydraulic pedal project project sim hardware sim rig simracing simulation
    • Replies: 8
    • Forum: Sim Racing Hardware
  15. Mr. Vermeer

    DIY Sequential Shifter using Suzo Happ and Pro Micro

    Hi all! As I'm a big fan of Rally Sims, I decided to build my own sequential shifter to accompany my G27 setup. I wanted it to be relatively simple to build, but aesthetics were a priority. I wanted it to look professional-ish and as it is one of my first real builds in a long time, the...
  16. M

    Looking to invert CSR elite pedals...

    I recently got a ridiculous deal on a Fanatec CSR wheel and Elite pedals and whilst they are worlds better than my previous DFGT, I'm not getting on with the pedals too well and would like to invert the clutch and brake, because of the age of this setup Fanatec no longer stocks the inversion kit...
  17. S

    Questions on servo motor soldering

    Hi all, I am doing a project in building myself a customised sim racing steering wheel I just bought a servo motor from a supplier and having some questions on soldering wires: What i got: 1x MIGE s130-M50 servo motor 1x Arduino UNO If any of you knows the wiring diagram to wire the servo...
  18. clos2727

    DIY complete guide to building a wood rig

    I built this about a month ago and thought I'd share me design. It's a complete walkthrough, and step by step tutorial to get you rig going with less tha $200. You can see pics of the rig here https://m.facebook.com/story.php?story_fbid=2197928810438208&id=1449896668574763
  19. callumjtc

    Developing an improvement in sim racing hardware

    Hi all, I am participating in a design technology project under the context of simulator racing, completing a working prototype that I will test on my sim rig at the end of the project. The focus is on affordable consumer grade equipment, looking at shortfalls in realism and tactile feel in...
    • callumjtc
    • Thread
    • assetto corsa assetto corsa competizione competizione diy hardware hydraulic pedals sim racing
    • Replies: 18
    • Forum: Sim Racing Hardware
  20. Astrit Arsllani

    GT style wheel + button box! Need Solution

    Hello everyone Sooo, i have a Thrustmaster T300RS and i'm on my way into building a GT3/GTE car style steering wheel, and in this wheel i will have these things implemented: 1. Push buttons 2. ON/OFF toggle switches 3. Rotary encoders with push function all of this connected to a LEO BODNAR...

Latest News

What would make you race in our Club events

  • Special events

    Votes: 46 26.3%

  • More leagues

    Votes: 32 18.3%

  • Prizes

    Votes: 32 18.3%

  • Trophies

    Votes: 18 10.3%

  • Forum trophies

    Votes: 11 6.3%

  • Livestreams

    Votes: 28 16.0%

  • Easier access

    Votes: 96 54.9%

  • Other? post your reason

    Votes: 29 16.6%
See comments…
Back
Top